1. After the Modem and Phone is installed and the Server Software is installed do the following:

2. Setup a printer 97 with HP laser jet codes in Printer Entry (see below). It is not necessary to create a D3 printer.

       Printer Number   :  97

                                                    

1.  Description      :  HP Emulation fax printer

                                                    

2.  Printer Codes Desc. Turn On Feature

     10 CPI                     27 40 115 49 48 104 49 50 86

     12 CPI                     27 40 115 49 50 72

     17 CPI                     27 40 115 49 56 72

     Double Wide                27 40 115 53 72

     Near Letter Quality

     Data Quality

     Bar Code Setup

     6 LPI

3. Setup 97 as the FAX printer in port entry. ie, 1.10, option 8

       Eg, Port #            : 88

                                                                     

1.  Description       : Tech

2.  Location          : 1 My Paint Store

3.  Invoice Date      : 08/21/2006

4.  Terminal Type     : MMA

5.  Back Office Post  :

6.  Slave On          : 27 51

7.  Slave Off         : 27 52

8.  Printer                        Printer Assignment Number

Purchase Order                                    0     SYSTEM PRINTER

Paint Label Printer                               7     Diskette Label Ptr

Bar Code Label Printer                    0     SYSTEM PRINTER

Fax Assignment                            97    HP Emul fax ptr

Transfer PO                                       0     SYSTEM PRINTER

Receiving Cost Change Report           0     SYSTEM PRINTER

4. There is a known Bug on some types of Multitech modems when receiving faxes. To correct this choose the menu COMMUNICATION->MODEM->MODIFY->EXTENDED. Enable the option "Reverse Bit Order for Incoming Calls". Do this setting only if you are having trouble receiving faxes.

5. Manually change Modem Type to Generic Class 1 Modem under Modem Settings for your current active modem. Also click on Extended and make sure the Enable Error Correction Mode is checked.

6. Create directory C:\ACTFAX on the main server and make sure that the folder is shared with full control access.

7. On the menu option in the active fax software, choose the menu COMMUNICATION->FILE SYSTEM.  Setup active Fax to poll the C:\ACTFAX directory every 10 seconds.  If the Active Fax Server is installed on the Main Server, click on the NEW button and then search, or browse to the directory.  If Active Fax server is set up on another machine, see step 11.

8. In TCL type the following:

       U MASTER FAX.SERVER

01 ACTIVEFAX

02 DOS:C:\ACTFAX

03 PERF.COV  (If you create your own cover page this must be changed to use it!)

04 DOS:C:\Program Files\ActiveFax\Server

* Added a new setup requirement on attribute 4 to point to the Server directory within ActiveFax. This is where attachments will be filed and picked up as attachments by the ActiveFax program when the file is emailed.

9. The PERF.COV file should be copied from \\PERF2K\FILES\TECH\ACTIVEFAX to the server where you are setting up Activefax under the drive where it is installed (ex: C:\Program Files\ActiveFax\Server). The customers can design their own cover page but we provide this one for basic usage.

10. In TCL type the following:

       U MD ACTFAX

01 Q

02

03 DOS:C:\ACTFAX

11. If you can’t see the modem, reboot and delete it and have the software find it again. With the new USB Mutlitech modem, load driver for modem from the CD, it works better then the one Windows loads automatically.

12. If the Active Fax Server is loaded on the Main Server, YOU ARE DONE.  DO NOT CONTINUE WITH THE NEXT STEP

13. If the Active Fax Server is loaded on another PC, you will need to create a Network drive from that PC to the Main Server.

On the PC, where Active Fax Server is loaded, Go into Window Explorer and click on TOOLS – MAP NETWORK DRIVE and browse to the ACTFAX folder that you created on the Main Server and make a share.  PS. Make sure that the option to “Reconnect at Logon” is checked.

In Active Fax under COMMUNICATION->FILE SYSTEM click on the NEW button and then search, or browse to the Network Drive you just created e.g. (F:\)

*Note that some stores have to dial a 9 before that can get an outside line.  If this is the case, go to COMMUNICATION->MODEM, click on modem in the list and then modify then check the prefix box and type in 9, (comma is important because it cause the phone to pause and wait for dial tone).

NOTE: To receive faxes through a printer, open FAX SERVER->EXTRAS->OPTIONS->PRINTING, place a check mark in “Automatically print incoming fax messages after receipt,”

and select the printer.

Receiving faxes through a fax machine

In Active fax under COMMUNICATION> MODEM, highlight the modem, click MODIFY, and uncheck “enable incoming calls”.

Receiving faxes through a printer (laser or inkjet)

Setup a printer on the PC where Active Fax Server is loaded. In Active Fax under EXTRAS> OPTIONS click on the PRINTING tab, check AUTOMATICALLY PRINT OUTGOING FAX MESSAGES and pick the printer you are using, and click OK.