*Note: instructions are for a IBM 3151 terminal only, maybe not work with other IBM terminals.
Ctrl-Setup to get into setup.
(there are two different versions of setup in the 3151)
<SEND> to go between Menus
Use Arrow keys to move to fields. Use Space bar to change setting.
General
-------
Machine Mode = Adds VPA2
Enhance Mode = On
Screen = Normal
Row & Column = 24X80
Scroll = Jump
Auto LF = Off
CRT Saver = On
Linewrap = On
Attribute = Screen
Return/Enter = CR/CR
Word Processing = Off
Protect = Half-Int
Communication
-------------
Operating Mode = Echo
Line Speed = 9600 (or greater)
Word Length = 8
Parity = No
Stop Bit = 1
Parity Check = Off
Line Control = IPRTS
Pacing = On
Block End = US/CR
Edit Mode = Duplex
Keyboard Lock = Enable
Printer
-------
Baud Rate = 9600
Word Length = 8
Parity = No
Stop Bit = 1
Function
--------
RECALL
SAVE
RESET-TERMINAL (Does Not Change Settings)
DEFAULT
CLEAR STATUS
MODE ADJUST
To set Function keys, from outside of the setup (i.e. back to PM), press <CTRL><ESC>. Then, type the # of the key to change and press <SEND> (i.e. for F1 type 01). Then, enter the value to place in the function key, and press <SEND>. <CTRL><ESC> to exit function key setup.