Links Terminal Setup

1. Hit Shift-Select (top right of keyboard) to enter the setup screen for the Terminal.

2. Hit F4 to select the Baud Rate.

3. Hit the SPACEBAR to change the rate to 19200 or 9600.

4. Hit F2 to select the Emulation.

5. Hit the SPACEBAR to change the emulation to Adds A2.

6. Hit F3 to select Keyclick function.

7. Hit the SPACEBAR to change it to OFF.

8. Hit F12 to EXIT.

9. Hit the SPACEBAR to change NO to YES.

10. Then hit F12 again to save new settings.

*Note – Changing the Emulation, clears all the function keys.

To set up Function Keys:

1. Hit F5 to select the Function Key menu.
2. Hold down the Control key and hit a function key on the top row (to select the function key you want to program).
3. Then type in your program sequence.

                               *Hit the ENTER key to program an Enter.

                               *Hit the ESCAPE key to program an Escape.

                               *Hit the BACK SPACE key to program an Back Space.

4. When done hit F12 to EXIT.
5. Hit the SPACEBAR to change NO to YES.
6. Then hit F12 again to save new settings.

*Please Note-Never Use the Number Pad when Programming Function Keys.